English
русский
Español
简体中文The wire rope used for elevators is special for elevators, and the country has special regulations and requirements. The configuration of the wire rope is not only to bear the elevator car and rated load, but also considers the size of the traction force.Elevator Manufacturer
Therefore, the tensile strength of the wire rope is much greater than the load of the elevator, and their safety factors are all above 12, usually elevators Equipped with more than four wire ropes, under normal circumstances, the elevator wire rope will not be broken at the same time. The safety factor of the elevator is very high. If the wire rope is broken, the elevator will be stopped and put into use after the wire rope is replaced.
