During the bai installation process, the elevator should first understand the working principle of the elevator: the two ends of the zhi traction rope are connected to the car and the counterweight, and are wrapped around the dao traction wheel and the guide wheel. The traction motor decelerates After the gear shifter drives the traction wheel to rotate, the traction force generated by the friction between the traction rope and the traction wheel can realize the lifting movement of the car and the counterweight to achieve the purpose of transportation. The guide shoe fixed on the car can reciprocate up and down along the fixed guide rail installed on the wall of the building shaft to prevent the car from deflecting or swinging during operation. The normally closed block brake releases the brake when the motor is working, makes the elevator run, brakes in the event of power failure, stops the car to rise and fall, and maintains its static state on the designated landing for people and goods to enter and exit.Machine Room Elevators Suppliers

Cautions for the transfer elevator: The car is a box part that carries passengers or other loads. The counterweight is used to balance the car load and reduce the motor power. The compensation device is used to compensate the tension and weight changes in the movement of the traction rope, so that the load of the traction motor is stable, and the car can be accurately stopped. The electrical system realizes the control of the elevator movement, and at the same time completes the layer selection, leveling, speed measurement and lighting work. Instruct the call system to display the direction of car movement and the floor location at any time. The safety device guarantees the safe operation of the elevator.