Tenau Elevator (China) Co., Ltd.

What should be considered before installing a Passenger Lift

What should be considered before installing a Passenger Lift

There are several factors that should be considered before installing a Passenger Lift. First and foremost, you should have a suitable space for installing the lift. The location should be easy to access and should be precise in its elevation distance. In addition, you should ensure that you have sufficient space to accommodate the driving mechanism. Once the passenger lift has been installed, you should test it thoroughly to ensure that it works properly. Also, it should be able to withstand the weight of a full-sized person.
A passenger lift can be installed on your property if you wish to transport multiple people safely. In general, an eight-person model can be installed. Passenger lifts are specifically mentioned in Volume 2, Part M of the current building regulations. A lift shaft must be installed before a passenger lift can be installed. A passenger lift should be installed in buildings with a lift shaft and cannot travel faster than 0.15 meters per second. This type of lift is typically installed in new construction buildings or those that already have a lift.
A destination control system is also available for use with an elevator. It allows the operator to select the floor to which a passenger wants to go. Often, the door of an elevator should remain open while parked on a floor. In some cases, it may be used for temporarily transporting goods. In large buildings with multiple elevators, an elevator dispatcher would wait in the lobby to direct passengers. The operator could then leave the building using a mechanical "cricket" noisemaker to signal that he is leaving the building.
The up-peak mode of an elevator is triggered by a time clock, a number of fully loaded cars in the lobby, or a switch operated by a building attendant. When a building is in down-peak mode, the elevator car is sent down a floor after receiving a call from the hall. The down-peak mode helps the elevator system accommodate maximum passengers without straining its resources. However, it can be difficult to operate in down-peak mode.

Contact Us

*We respect your confidentiality and all information are protected.